高的电压小瞬时电流可靠性耐压试验仪（耐电孤可靠性耐压试验仪）-（确定机调整）

High voltage low current tester (arc resistance tester) - (computer control)

护肤商品名字大全称：耐电弧试验机

Product name: electric arc resistance tester

服务类型：NDH-A

Product model: NDH - A

需要满足标准：GB/T 1411-2002《固态物隔热涂料耐高压得很低的感应电流弧光电流的试验台》（共同IEC  61621-1997）及ASTM D495等规范的的要求设置加工的，并达到IEC 149、UL 746A等检测具体方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

通常适于范畴及功效：

本试验报告机是依据app于调速电机、电器开关产品和挂式电器开关产品等领域的技工用塑胶板材、环氧光敏树脂胶和接地漆等接地相关文件的耐脉冲放电效能认定，主应用于粉末状接地相关文件如：塑胶板材、贴膜、环氧光敏树脂、云母片、淘瓷、窗玻璃、接地油、接地漆、硬纸板等物质的耐脉冲放电效能测量；

本试验装置机由计算出来机调整操作，是可以屏幕上显示某些科学试验状况及科学试验时段，科学试验完成后并保管某些科学试验信息，并可印刷.原则实验所报告格式。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为上下两边内置式结构的，上方为工作整体，上方为检验箱。

2 本厂品采取*新自动化控住系统，实现考虑程序流程图（IEC或ASTM）可自动的展开试验台，并在线上上出现试验装置的时候和最终。

3 **机械性能保持良好，抗扰乱水平强，检查精密度较高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断用时测量误差：值为 ±10ms

2 调压器储存量：2kVA

3 载荷系数试验装置交流电压：12.5kV

4 实验输出功率精密度较：±3%

5 直流电压把握高精度：±10%  电流大小检测的准确度：1.5%

6 参比电极对试件各种压力：（0.5±0.05）N

7 参比电极材质：钨棒

8 工业间距：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 安全使用的温度表：（23±2）℃

10 的使用生活环境温湿度：（50±5）%

11 电源适配器：220V±5%  50Hz  10A

12 试验台    办法：   国际标准/美标/10 mA 连续式/20 mA 连续性/30 mA连继/40 mA联续

13 试验装置应用程序相应：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 新产品规格型号：

NDH-A    耐脉冲检验仪-微机操作

NDH-B    耐弧光可靠性试验仪-触控屏把控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！